Cookies ussage consent
Our site saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing our site without changing the browser settings you grant us permission to store that information on your device.I agree, do not show this message again.
K. MURALI KRISHNA1,* , M. GANESH MADHAN1
- epartment of Electronics Engineering, Madras Institute of Technology campus, Anna University, Chennai 600 044, India
In this work, gain switched 1.55µm Vertical Cavity Surface Emitting Laser (VCSEL) is analyzed for simultaneous transmission of Gigabit digital data as well as for remote millimeter (mm) wave generation at harmonic frequencies in a Single Mode Fiber (SMF) link. Numerical simulation of gain switching on VCSEL under square pulse excitation is carried out. For Gigabit Ethernet link transmission, the maximum link lengths for both 1.25 and 2.5Gbps are found as 106 km and 96 km at BER ≤ 10-10. For a link length of 10km, the generated RF power at 2.5GHz, 5GHz and 10GHz frequencies are -25.68 dBm,-28.49 dBm and -37.13 dBm respectively, under 2.5 Gbps transmission. Signal powers of -35.05 dBm,-36 dBm, -39.52dBm and -50.56dBm are observed for 1.25GHz, 2.5GHz, 5GHz and 10GHz respectively, under 1.25Gbps transmission..
Gain switching, Full width at half maximum, VCSEL, Power spectrum, Remote mm wave generation, Radio over fiber.
Submitted at: April 19, 2018
Accepted at: Feb. 12, 2019
K. MURALI KRISHNA, M. GANESH MADHAN, Performance evaluation of remote millimeter wave generation in a digital optical link incorporating a gain switched vertical cavity surface emitting laser, Journal of Optoelectronics and Advanced Materials Vol. 21, Iss. 1-2, pp. 54-63 (2019)
- Download Fulltext
- Downloads: 120 (from 83 distinct Internet Addresses ).